Conducte Jacking

desen tehnic

Diametru nominal DN 200

Lungime (cm)

Greutate
60 kg/m

Rezistență la strivire FN
80 kN/m

rezistență longitudinală
100 N/mm²

Caracteristici

			DN 200
Diametru interior	d₁	mm	199 +/- 2,5
Diametru mufă	d₃	mm	244 +/- 2,0
Diametru mufă	d_M	mm	276 +0/-4
Adâncime îmbinare	e	mm	49
Lungime conductă	l₁	mm	990
Diametru cuplaj	d_k	mm	261
Grosime cuplaj	s_k	mm	1,5
Lățime cuplaj	b_k	mm	103,1
Grosime inel de transfer a presiunii	D_z	mm	10
Forța de împingere maximă foraj pilot*		kN	300
Forța de împingere maximă microtunelare*		kN	-

Scurtă descriere

* Please note:
- The maximum permissible jacking force must be calculated in each case according to the applicable regulations, e.g. DWA-A 161 of March 2014 .
- Values given here serve only as a guide for planning
- This is subject to the condition that the effective jacking forces are continuously monitored and logged during the jacking process
- The maximum pressure of the jacking device must be limited to the permissible jacking force

Our smaller-diameter KERA.Drive jacking pipes have proven themselves over many years of use, both for house connections and for main sewers up to DIN 200.

Glazed both inside and outside, coupling made of corrosion-resistant stainless steel in accordance with EN 295, with integrated rubber joint and pre-assembled thrust ring made of wood P5 in accordance with DIN 312.