120 kg/m
120 kN/m
100 N/mm2
Caracteristici
| DN 300 | |||
|---|---|---|---|
| Diametru interior | d1 | mm | 305 +/-5 |
| Diametru mufă | d3 | mm | 387,4 +0/-1 |
| Diametru mufă | dM | mm | 417 +0/-10 |
| Adâncime îmbinare | e | mm | 55 |
| Lungime conductă | l1 | mm | 996 |
| Diametru cuplaj | dk | mm | 405,5 |
| Grosime cuplaj | sk | mm | 1,5 |
| Lățime cuplaj | bk | mm | 104 |
| Grosime inel de transfer a presiunii | Dz | mm | 5 |
| Forța de împingere maximă foraj pilot* | kN | ** | |
| Forța de împingere maximă microtunelare* | kN | ** | |
Scurtă descriere
* Please note:
- The maximum permissible jacking force must be calculated in each case according to the applicable regulations, e.g. DWA-A 161 of March 2014 .
- Values given here serve only as a guide for planning
- This is subject to the condition that the effective jacking forces are continuously monitored and logged during the jacking process
- The maximum pressure of the jacking device must be limited to the permissible jacking force
** Données fournies sur demande
After the sintering process, our medium and large-diameter jacking pipes obtain a particularly smooth surface with minimal frictional resistance and high resistance to biological and chemical substances. Because of the materialspecific smooth surface, additional glazing is not required. KERA.Drive jacking pipes are ideal for wastewater disposal from households and industry.
Through our cooperation with external monitoring institute MPA NRW, our jacking pipes are continually being inspected. They comply with all of the requirements of DIN EN 295, and also have unrestricted approval from the German Federal Railway Authority for installation underneath rail tracks.
Our KERA.Drive pipes in the DN 250 and DN 300 diameter ranges are available for jacking sewers of all kinds. The pipes feature a specially developed coupling system that easily withstands internal and external pressure exceeding 0.5 bar, making them the perfect solution for a wide range of potential applications.
Coupling made from corrosion-resistant stainless steel in accordance with EN 295 with integrated pre-installed rubber thrust ring.
