Greutate
60 kg/m
60 kg/m
Rezistență la strivire FN
80 kN/m
80 kN/m
rezistență longitudinală
100 N/mm2
100 N/mm2
Caracteristici
DN 200 | |||
---|---|---|---|
Diametru interior | d1 | mm | 199 +/- 2,5 |
Diametru mufă | d3 | mm | 244 +/- 2,0 |
Diametru mufă | dM | mm | 276 +0/-4 |
Adâncime îmbinare | e | mm | 49 |
Lungime conductă | l1 | mm | 990 |
Diametru cuplaj | dk | mm | 261 |
Grosime cuplaj | sk | mm | 1,5 |
Lățime cuplaj | bk | mm | 103,1 |
Grosime inel de transfer a presiunii | Dz | mm | 10 |
Forța de împingere maximă foraj pilot* | kN | 300 | |
Forța de împingere maximă microtunelare* | kN | - |
Scurtă descriere
* Please note:
- The maximum permissible jacking force must be calculated in each case according to the applicable regulations, e.g. DWA-A 161 of March 2014 .
- Values given here serve only as a guide for planning
- This is subject to the condition that the effective jacking forces are continuously monitored and logged during the jacking process
- The maximum pressure of the jacking device must be limited to the permissible jacking force
Our smaller-diameter KERA.Drive jacking pipes have proven themselves over many years of use, both for house connections and for main sewers up to DIN 200.
- Glazed both inside and outside, coupling made of corrosion-resistant stainless steel in accordance with EN 295, with integrated rubber joint and pre-assembled thrust ring made of wood P5 in accordance with DIN 312.